The actual transformer is encapsulated in the enclosure.
Input leads are 20 AWG output leads are 16 AWG.
Lead insulation is 105°C.
The transformer uses a class B 130°C insulation system.
Enclosure temperature does not exceed 70°C @ 40°C ambient.
Wiring compartment has 2 knockouts sized For 3/4 inch screw cable connectors.
The removable cover for the wiring compartment is secured in place by screw.
The enclosure is black powder coated.
The transformer has a manual reset thermal circuit breaker on the secondary side.
The transformer can be controlled with a low-voltage dimmer.
The transformer is ETL listed.
Max Load: 150W
Weight: 6 lbs.
Input Voltage: 120V 60Hz
Output Voltage Full Load: 11.5VDC
Input Current Full Load: 1.27mA
Open Circuit Volts: 12.5VDC
Output Current Full Load: 12.5A
Coil Former: Double section Bobbin
Thermal Class: B 130C
Leads Primary: PVC 600V 20#
Leads Secondary: PVC 300V 12#
Dimensions: Lenght:9 3/4", Width: 3", Depth: 2 7/8"